Power supply: SNMP and Web UI monitoring
Request for the SNMP polling /trap for power supply.
Request can using command /web ui to read power supply status
It should be possible to read the power supply status from the cli
here is the output from XG125 17.5.8:
XG125_XN03_SFOS 17.5.8 MR-8.HF042920# dmidecode -t 3
# dmidecode 2.12
SMBIOS 3.0 present.
# SMBIOS implementations newer than version 2.7 are not
# fully supported by this version of dmidecode.
Handle 0x0003, DMI type 3, 22 bytes
Manufacturer: Default string
Lock: Not Present
Version: Default string
Serial Number: Default string
Asset Tag: Default string
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Number Of Power Cords: 1 <-----
Contained Elements: 0
SKU Number: Default string
i'm currently looking into writing custom MIBs
I arrived at this page with the help of a support engineer.
We made the power supply units redundant, but at present we will not notice until both power supplies fail.
We wish that improvement of function to detect hardware errors by remote monitoring.
In addition to power supplies, I think we need to add in traps for monitoring links, IPSec tunnels, disks, power, overload, etc, etc, etc. Everything that the Sophos UTM supported should be ported to the XG line.