WebAdmin: Select interface for SNMPd
It would nice to be able to bind the snmp daemon to defined addresses.
For example a problem:
Monitoring through VPN (ipsec0) is not working cause the snmp-read requests to a local interface of the astaro are answered by the ip of the ipsec0 interface (outgoing). Therefore the replies can not be assigend to the former read.
Ken Watts commented
NAT doesn't work for us.
Oliver Hamel commented
Hi Elmar, thank you. I already did that. Anyways this was just one real life example.
It would be nice to be able to configure the snmpd behaviour.
Elmar Haag commented
YOu should be able to do this on two ways:
either do not send the requests to a local interface but send them to the IP of the IPsec interface. then the requests and the responses match the same IP and it shoudl work
you can use NAT to change the IPs how you want