Add the ability to import RED Unlock codes into SUM
In the event of a hardware failure of the UTM having the Unlock codes right there with the backups would be very handy instead of in a spreadsheed you would have to find

Really usefull that the "wan" interface of the RED device can get an IPv6
more small telcos goes to that scenario of deployment (IPv6) and they would use red behind their POE
so tunnel between REd-Device and SophosUTM in IPv6

I would love to see an option where i can choose internet traffic to go from local internet line rather then RED IPSec tunnel to UTM to reduce bandwidth load on upload tunnel.
A service based option where we can divert traffic for example HTTP, SMTP to use local internet line where red is connected and DNS, DHCP, FTP to use RED tunnel going towards UTM.

Why not integrate wifi into the RED? Just adds to its simplicity.

It would be nice on the UTM to have a Link to a help screen that lists the Light Available on that RED Version and the Light Codes for the boot sequence. Ver 1 has a System, Router, Internet and Tunnel, while other might have a System, Internet and Tunnel only. Also the little 1 sheet setup guide on newer RED devices doesn't detail what the light error codes mean. So you now have to guess if the problem is with the provider or with the RED itself.

Please allow SSL v2 and v3 on RED to be disabled. PCI compliance now requires SSL v2 and v3 to be turned off. Need this feature asap for clients to be PCI compliant!

Thank You

Recently I come across a situation where on WAN 1, it is connected to a ADSL connection with a very slow upload speed, on WAN2, it's connected to a 4G network. It would be great if there is a feature like multipath so that all the upload traffics go through WAN 2 on a faster upload speed.

With the wide use of 4G network around the world, I would like to see the REDs have better supported 4G devices for failover rather than just only 1 at the moment which is not very common and hard to find.

NAT and PAT for RED device on external interface, if RED device using static IP address

We want the ability to use an iPhone ( or Android ) as a modem via USB tethering in the event of an internet outage at the site.

Instructions from IT would then be as simple as asking the Branch manager to plug their iphone into the red and turn hot spotting on.

Allow a growing organization to repurpose a SG105 or 115 as a RED device as their needs grow. This would avoid trashing the device when you outgrow it.

current version of LTE Surfstick version - not listest as supported LTE/UMTS device

For larger implementations of UTM / RED, and to also benefit our PS offering - wouldn't it be great if we could import RED serial numbers from CSV directly into WebAdmin, to speed up the process?

The serial numbers are already available in SalesForce which would reduce the time taken to get this feature off the ground.

UTM already shows in the main RED tab the IP addresses used by the RED devices do connect to the UTM. It would be great if this IP address could be used to update a dyndns host name and thus allow monitoring if the internet link of the remote side of the tunnel, when dynamically assigned IP are used on the remote side. Today, on a dropped RED connection, there is no way to know if the problem is with the remote internet link or the tunnel between sites.

create a RED client for PC (Windows, MAC OS and Linux) as well as for mobile platforms (Android, iOS)

I would like to have granular control on what traffic is split-tunneled through the RED. Specifically based on port number.

I need to allow a user to view the status (Online/Offline) of all redboxes, as seen on Tab "Overview" under RED Management. This user should not see any other configurations or logs.